Product launch agenda and run of show: the event, the meeting, the day
Quick answer: A product launch event agenda runs about 45 minutes: doors, welcome, the problem, the reveal, a live demo, who it's for and the price, a customer voice, Q&A and a closing next step, with a producer cue on every line. Two days earlier, hold a 30-minute go/no-go meeting where each owner says what isn't ready.
- Write a run of show with five columns: time, segment, speaker, screen and producer cue.
- Put the live demo right after the reveal and the Q&A after the price slide.
- Adjust the opening for the platform: a Premiere countdown, LinkedIn's start window or a Simulive switch to live Q&A.
- Hold a 30-minute go/no-go meeting two days out where each owner says what isn't ready.
- Caption the launch live and send a transcript with the replay.
Two agendas, one launch
People searching for a product launch agenda usually need one of two documents: the run of show for the public launch event, or the agenda for the internal meeting where the team decides the launch is ready. You need both, and the same person should write them. Below is each one, then a launch-day schedule that connects them.
Product launch event run of show (45 minutes)
A run of show is more than a list of topics. Each line says who is talking, what is on screen and what the producer does. Use five columns: time, segment, speaker, screen, producer cue.
- -15:00 to 0:00. Doors. Holding slide with the title and start time. Producer: confirm captions are on, the demo machine is logged in and a backup recording of the demo is loaded.
- 0:00 to 2:00. Welcome. Host on camera. Producer cue: post the "questions go here" message in chat.
- 2:00 to 6:00. The problem. Host or a customer guest. Screen: photos or a screen recording of the old way.
- 6:00 to 8:00. The reveal. Founder. Screen: product name and one-line promise. Producer cue: switch to the hero shot on the founder's word, not before.
- 8:00 to 22:00. Live demo. Product lead. Screen: the product. Producer cue: if the demo stalls for more than 20 seconds, cut to the backup recording and say so.
- 22:00 to 25:00. Who it's for, price and availability. Founder. Screen: one slide with all three.
- 25:00 to 28:00. Customer or early user. Guest on camera.
- 28:00 to 40:00. Q&A. Host reads, product lead answers. Producer cue: group duplicate questions and route anything about price or shipping to the founder.
- 40:00 to 43:00. One more thing and next step. Founder.
- 43:00 to 45:00. Close. Host says when the replay goes out and where to buy. Producer cue: post the link in chat again.
The demo sits right after the reveal on purpose, while people are still deciding whether to stay. Putting Q&A after the facts slide means people ask about the product rather than hunting for the price.
Fitting the agenda to the platform
The platform changes the first and last minutes of the run.
- YouTube Premiere: the countdown starts at the scheduled time and runs for the length you chose, and viewers can rewind but can't skip ahead of the live point (YouTube Help). Treat the countdown as your doors segment and start the film's own content on the welcome.
- LinkedIn Live: people who click Attend get reminders three days and 15 minutes before, and you can go live from 15 minutes before to two hours after the scheduled start; outside that window the stream shows as cancelled (LinkedIn Help). Start on time anyway, because the 15-minute reminder set the expectation.
- Pre-recorded with live Q&A: Zoom's Simulive plays a recording at the scheduled time, then switches to live mode for Q&A, and its Backstage is a space attendees can't see where the team coordinates. That splits the run cleanly at the Q&A line.
Make the launch accessible. WCAG 2.1 success criterion 1.2.4 asks for captions on all live audio content (W3C). Apple offers a "Watch in ASL" version of each of its events; a smaller company can at least caption live and send a transcript with the replay.
Internal launch meeting agenda (go/no-go, 30 minutes)
Hold it two days before launch with every owner in the room or on the call.
- 0 to 3: The decision. The host states the launch date and that the meeting ends with go, go with changes, or no-go.
- 3 to 15: Owner check-ins, two minutes each. Product, stock or access, website, email, launch event and support. Each answers one question: "Is anything not ready?"
- 15 to 22: Open risks. Each gap gets an owner and a fix-by time, or it moves the date.
- 22 to 27: Launch-day roles. Who presents, who produces, who watches chat, support and orders.
- 27 to 30: The call. Go, go with changes, or no-go, written into the team channel so nobody remembers it differently.
The readiness questions to ask are on the product launch checklist.
Launch-day schedule template
- Morning: a final demo run on the live machine; open the registration page, store page and join link from a phone.
- Three hours before: announcement email scheduled; partners reminded of their posting time.
- One hour before: speakers in, cameras and audio checked, backup recording queued.
- Event start: the run of show above.
- Right after: a 15-minute debrief while it's fresh; write down every unanswered question.
- Next morning: replay and answers to the unanswered questions sent to every registrant.
Worked example: an architecture software launch
Plotline is a made-up project management tool for small architecture firms, launching a drawing-review feature. Its buyers are firm principals who spend much of the day in client meetings.
- Slot: a 45-minute live launch at 12:30 p.m. on a Wednesday, the slot Plotline's beta firms said they could most often keep free.
- Run of show: the template above, with the problem told by a project architect from a beta firm who describes a markup lost in an email thread.
- Demo: the product lead marks up an anonymized floor plan, tags a structural consultant and resolves a comment, in 14 minutes.
- Q&A: questions about file formats go to the product lead; a pricing question goes to the founder.
- Go/no-go: held the Monday before. Support doesn't have the import guide ready, so the team finishes it Tuesday and keeps the date.
- Next morning: the replay, with captions and a transcript, goes to all registrants.
No attendance figures are claimed. The schedule fits Plotline because its buyers can't step out of client work mid-afternoon.
Costs and time
- Writing the run of show: about two hours, plus a full rehearsal of about an hour with every speaker.
- Go/no-go meeting: 30 minutes of each owner's time, far cheaper than a broken launch.
- With BrightStage AI: "Suggest" buttons fill event fields with AI for 1 credit per click, and the video creator can build the script and slides for the backup demo recording.
Agenda mistakes to avoid
- The CEO's history before the reveal. Move it to the close, or cut it.
- No producer. Presenters can't watch chat, switch screens and keep time all at once.
- No backup demo. Live demos fail; have the recording queued.
- Q&A with no moderator. Duplicate and off-topic questions eat the time.
- Starting late for stragglers. Respect the people who arrived on time.
For the words spoken in each segment, see the product launch script. If you're weighing how to follow up with attendees afterward, AIVX Labs compares an AI chatbot builder with email sequences.
How BrightStage AI runs the launch event
BrightStage AI, by Podavinci LLC, hosts the event side of this agenda, live or as an automated (evergreen) repeat. Its Join window lets attendees join in the browser or install the app, and reminders go out by email, text and web push on desktop and Android. During Q&A, a chat assistant answers routine questions in the event chat so the moderator can focus on the hard ones, and review cards collect testimonials. Sale announcements show only real purchases, and the replay, called "Encore", covers the next-morning send.
Sources
Frequently asked questions
What is a good product launch event agenda?
About 45 minutes: welcome, the problem, the reveal, a live demo, who it's for and the price, a customer voice, Q&A, and a closing next step. Keep a backup recording of the demo ready.
What goes on a product launch meeting agenda?
The launch date and decision, a two-minute readiness check from each owner, open risks with owners and fix-by times, launch-day roles, and a recorded go, go-with-changes or no-go call.
Is there a product launch schedule template?
Plan the day in blocks: a morning demo check, the announcement email three hours before, speakers in an hour before, the event, a 15-minute debrief, and the replay with answers the next morning.
How long should a product launch event be?
Around 45 minutes fits a reveal, a real demo and a proper Q&A. Shorter works for small feature launches to existing customers.
Related playbooks
Written by Alan Magliocca, founder of BrightStage AI and AIVX Labs (Podavinci LLC). Written with AI assistance and checked against the linked sources. Follow along: LinkedIn · YouTube · TikTok · X · Facebook · Instagram · Skool community
